Original
By certification 
Broadband Isolator
Broadband isolator has the advantages of wide frequency band, good isolation performance, good port standing wave, simple structure and easy processing.
The third end of the broadband isolators will have attenuation chip or RF resistor.
Broadband isolator can work in a wide frequency band. The wider the frequency, the more difficult it is to achieve high-quality index requirements. And the working temperature range of broadband isolator is limited. The broadband isolator cannot be used at high temperature or low temperature. Using it at low temperature or high temperature will damage the broadband isolator. The best operating temperature will be room temperature.
Ferrite is very important for RF isolator which mainly used to condense the magnetic energy in the magnetic field, so as to control the frequency of electromagnetic energy. The electromagnetic wave hardly attenuates when passing through the ferrite material, but there is a certain degree of phase shift, which mainly depends on the strength of the DC magnetic field induced by the ferrite. Therefore, after proper design of ferrite, it can be used to control the phase and direction of electromagnetic field flow.
RFTYT is Professional Customized RF Components Manufacturer with long history of producing RF Isolator, RF Circulator, RF Resistor, RF Attenuation Chip, Coaxial Load (Dummy Load), Coaxial Attenuator, RF Filter, RF Diplexer, RF Combiner, RF Coupler, Power Divider, Bridge, RF Amplifier, Coaxial Cable and other microwave communication products.
At present, our company has support 1-2GHz, 2-4GHz, 4-8GHz and 8-18GHz broadband isolators to many schools, scientific research institutions, research institutes and companies, which have been highly praised by customers. Here, we thank everyone for purchasing and using our products, and we will work harder to do a better job in products and services.
RFTYT 10MHz-20.0 GHz RF Broadband Isolator
Model |
Frequency Range |
Power (max) |
Reverse Power |
Size |
Connection Type |
Data Sheet |
TG6466H / WG6466H |
100 - 140MHz |
100W |
10-100W |
64.0*66.0*22.0 mm |
SMA/N/TAB |
|
TG4550X |
300 - 420MHz |
400W |
10-100W |
45.0*49.0*18 mm |
SMA/N/TAB |
|
TG6466K / WG6466K |
0.95 - 2.0 GHz |
100W |
10-100W |
64.0*66.0*26.0 mm |
SMA/N/TAB |
|
TG3538X / WG3538X |
1.0 - 1.5 GHz |
300W |
10-100W |
35.0*38.0*11.0 mm |
SMA/N/TAB |
|
WG3546X |
1.0 - 1.5 GHz |
300W |
10-100W |
35.0*46.0*11.0 mm |
SMA/N/TAB |
|
TG5050A / WG5050A |
1.5 - 3.0GHz |
100W |
100W |
50.8*49.5*9.5 mm |
SMA/N/TAB |
|
TG3234A / WG3234A |
2.0 - 4.0 GHz |
100W |
10-100W |
32.0*34.0*21.0 mm |
SMA/N/TAB |
|
TG6237A |
2.0 - 8.0 GHz |
20W |
5W |
62.0*36.8*19.6 mm |
SMA |
|
TG2528C / WG2528C |
3.0 - 6.0 GHz |
100W |
20W |
25.4*28.0*14.0 mm |
SMA/N/TAB |
|
TG2123B / WG2123B |
4.0 - 8.0GHz |
60W |
20W |
21.0*22.5*15.0 mm |
SMA |
|
TG1622B /WG1622B |
8.0 - 18.0GHz |
30W |
10W |
16.0*21.5*14.0 mm |
SMA |
If the frequency range you need is not covered in the form, please contact us for details.
Since the isolator needs to be customized according to your needs, please provide the following requirements when you send us inquiry: (Mark * is necessary needed)
*1. The frequency range you need.
*2. Power requirements (forward, reverse, etc.).
*3. Connector type
*4. Your special requirements if you have (insertion loss, isolation, VSWR, temperature, size, etc.)
http://www.rf-tyt.com/
