YL9-B+C surge protection device for AC 50/60Hz,385V and below the TN-S,TN-C,TN-C-S,TT,IT pwoer supply system,the power grid caused by lightning or surge voltage protection.
From the device failure
Module protector with failure from the device,when the protective device due to overheating,break down failure,the failure disengagement device can automatically detach it from the power grid,also give an indication signal.
MODEL |
YL9-B+C 4P
|
YL9-B+C 4P
|
SPD port
|
One port
|
One port
|
SPD category
|
Combination Type
|
Combination Type
|
Test category
|
Class I+II test
|
Class I+II test
|
Rated voltage of Un(V)
|
220V AC 50-60HZ
|
220V AC 50-60HZ
|
Max. continuous operating voltage Uc(V)
|
280V AC 50-60HZ
|
280V AC 50-60HZ
|
Norminal discharge current In(8/20μs)(KA)
|
30
|
30
|
Max.discharge current of Imax(8/20μs)(KA)
|
50
|
60
|
Max.impulse current of limp(10/350Ms)
|
7
|
12.5
|
Voltage protection level up(8/20 m s)
|
1.5
|
1.6
|
Fuse or circuit breaker/Backup protector(KA)
|
40A/80
|
40A/100
|
The response time of NS
|
≤25ns
|
≤25ns
|
Outline size(mm)
|
72*60*69
|
72*60*69
|
Failure indication
|
Green:normal Red:invalid
|
Sectional area of wires
|
6-25MM²
|
Installation method
|
35mm standard din rail (EN50022/DIN46277-3)
|
Environmental temperature
|
-40~85℃
|
Shell material
|
Accord with UL94 V-0
|
Protection grade
|
IP20
|
Remote alarm
|
Normally open/normally closed contact terminal(optional)
|
Remote signal interface connection capability
|
The maximum 1.5mm
|
Protector normal signs shown in green,red label display failure detachment.
http://www.ylong-elec.com/